SPECIFICATIONS for the DENTAL EFORM models
Multi position process unit, each pair of cells controlled individually to give accurate thickness and deposit density during electroforming Silver into moulds.

Dimensions: (10X) 540 wide x 490 front to rear x 250mm high.
“ ( 5X) 540 wide x 410 front to rear x 250mm high
( 2X) 220 wide x 412 front to rear x 250mm high

Solution volume (10X) 20 litres including filter pump.
“ “ ( 5X) 12 litres including filter pump
( 2X) 5 / 3 litres including pump. Note that this size unit can be used for small orders without a filter pump. Occasional manual filtration via a laboratory paper and funnel will be necessary to prevent roughness in the deposit.
Filter pump removes solids down to 10µ size with a replaceable cartridge filter.
DC outputs, 5 x 2 amps fully variable and digitally monitored.

AC input, 220 to 240 volt / 50-60Hz supply, 5 amps maximum, all models

PUMP agitation on 5X and 10X to ensure even thickness of metal and bright deposits.

Suitable for Silver or Copper electroforming.