Metal Finishing Plant & Chemical Engineers | | click here to bookmark this site
 
Home | Company Profile | Industrial Equipment | Jewellers Equipment | Metal Finishing | Contact | Site Map
Acid Tanks
  - Heated
- Plain
Anodising - Tarnish prevention

 

 - Titanium
- Aluminium
- Silver & Copper
Chemical Storage
  - Metal Cabinets
- Plastic Cabinets
- Fume Hoods
Consumable Materials
  - Plating
- Polishing
- Cleaning
- Anti Tarnish
- Colouring
- Casting Consumables
Custom Built Plant
  - Tanks
- Sinks
- Process Lines
Drying
  - Water Based
- Media Based
Electro Plating
  - Precious Metals
- Base Metals
- Pumps
- Baskets
- Mobile
- Pen & Wand Plating
- BTL
Electro Forming
  - Dental
- Decorative
Fume & Dust Extraction
  - Fume Enclosures
- Dust Extraction
- Inspection
Polishing
 

- Bench Top
- Floor Standing
- Motors
- Tumble
- Magnetic
- Vibratory
- Chemical 'Bombing'
- Electrolytic Polishing
Rectification
  - Plating
- Laboratory
- AMP time meters
Refining
  - Liquids FilterSaver
- Solids
Water Treatment
  - Sodium Hypochlorite Production
- Settlement Systems


in a plating shop is often caused by low levels of liquid in heated baths
INSTALL - fit to the side of the tank, connect to the heater circuit and you are protected.

SET - adjust the temperature setting and the safe liquid level.

CONTROL - Temperature and liquid level permanently monitored. Heater supply switches off at low level setting

MAINTENANCE - none except if settings need changing.

Fitting a BTL CONTROLLER to your tanks will remove the risk of an expensive fire.

Range of models to cater for different tank and heater requirements.

Temperature range: 0 - 90º C rotary dial.
0 - 100º C digital readout.
Control circuit rating: 0.5 amp 240 vac for coil activation (any kW)
10 amps 240 vac integral relay for up to
2 kW heaters


   

35 Nursery Road, Birmingham B19 2XN, England
Tel: 44 (0)121 554 1026 Fax: 44 (0)121 554 0597
Manufacturing processing equipment since 1969
© 2004 Balco Ltd - www.balco.co.uk All rights reserved | email: balcoeng@aol.com