Metal Finishing Plant & Chemical Engineers | | click here to bookmark this site
 
Home | Company Profile | Industrial Equipment | Jewellers Equipment | Metal Finishing | Contact | Site Map
Acid Tanks
  - Heated
- Plain
Anodising - Tarnish prevention

 

 - Titanium
- Aluminium
- Silver & Copper
Chemical Storage
  - Metal Cabinets
- Plastic Cabinets
- Fume Hoods
Consumable Materials
  - Plating
- Polishing
- Cleaning
- Anti Tarnish
- Colouring
- Casting Consumables
Custom Built Plant
  - Tanks
- Sinks
- Process Lines
Drying
  - Water Based
- Media Based
Electro Plating
  - Precious Metals
- Base Metals
- Pumps
- Baskets
- Mobile
- Pen & Wand Plating
- BTL
Electro Forming
  - Dental
- Decorative
Fume & Dust Extraction
  - Fume Enclosures
- Dust Extraction
- Inspection
Polishing
 

- Bench Top
- Floor Standing
- Motors
- Tumble
- Magnetic
- Vibratory
- Chemical 'Bombing'
- Electrolytic Polishing
Rectification
  - Plating
- Laboratory
- AMP time meters
Refining
  - Liquids FilterSaver
- Solids
Water Treatment
  - Sodium Hypochlorite Production
- Settlement Systems

SMALL SCALE REFINING
 
Determines Gold content of alloys and ores
 REDOX MR5 GOLD ASSAY UNIT


Testing Gold samples has never been made more economical and simple since the MR5 was developed by the partnership of an assay chemist and an engineer.

Looking at the available products on the market it was obvious to experienced users that the options were too crude and dangerous or were too expensive to buy.

The MR5 treats your Gold sample with acids under vacuum and then removes the other metals. The Gold is then precipitated from the solution and automatically filtered. After drying the sample can be weighed

Consider what the MR5 would do to your company profits if all samples were checked accurately.

Do you know exactly how much pure Gold there is in that sample?.

Take 50 to 100 grams of unknown material and EXTRACT all the Gold to 99.99% purity.

Fast - process a batch in a few hours.

No complicated installation or training, you can install and be operational within 1hour.

No operator risk - always protected from the process and fumes. No lifting and pouring of heavy & dangerous acid solutions

Short of space ? MR5 is a bench top unit taking less than 1 metre of space and runs on 200 to 250 volt supply.

35 Nursery Road, Birmingham B19 2XN, England
Tel: 44 (0)121 554 1026 Fax: 44 (0)121 554 0597
Manufacturing processing equipment since 1969
© 2004 Balco Ltd - www.balco.co.uk All rights reserved | email: balcoeng@aol.com