Automatic filtration
system for your laboratory sink waste.
Removes all particles down to 10 microns size.
Stops
dangerous or valuable particles from being washed away
Simple to install, plumb your FILTA SAVER into your sink waste,
connect to a 220/240 volt supply and switch on.
The FILTA SAVER will pump waste water up to more than 3 metres
high - perfect for the sink that is below waste pipe or sewer
level.
Information
Model number 2477D. Beige textured polypropylene, resistant
to all acids, alkalies and solvents. Large volumes of barrelling
waste and investment powder should be settled before using
the GOLD FILTA SAVER to prolong the filter cleaning cycle.
Size (LxWxHeight) 65 x 45 x 41cms. 200-240 volts A.C. at 2
amps.
Flow rate 240 litres per minute at 1 metre head. Weight empty
12 Kg
Fits
under standard sinks
Option
Model number 2476D, available as a standard SETTLEMENT
TANK without pump and particle filter with standard
40mm Ø waste fittings. Simply plumb the unit
into the waste pipe to reduce particle loss and the
silting up of your waste system.
Maximum dimensions ( LxWxHeight ) 57 x 50 x 41 cms,
Tank 50 X 40 X 41 cms
Acid Tanks
